Perhaps in some better world there are no borders and fences, however, in the present reality they exist. If so, then you should make something pleasant and more or less useful.
Therefore, each dacha fence is not just a fence, but also a continuation of landscape design, an architectural element that complements the overall style.
It is about the suburban fences and talk further. As such, the fence is an essential element, it frames the entire site and is a significant component.
Main options
There are many basic options, and here you should coordinate the choice with your site.
Great if there is a color combination with the roof of the house, or some other significant parts of the site.
So, the main options are:
- Rabitz;
- brick and concrete;
- professional flooring;
- polycarbonate;
- wood.
Depending on the material used, the foundation is selected. The lighter the material, the easier the foundation, it is quite possible to use the columnar. Large fences, for example, made of brick and concrete, require massive strip foundations.
Wood fence
A very interesting of these options is the fence of shtaketnikov, which are installed on the supports of metal pillars. Such a fence is a solid construction, a columnar foundation is required for supports, it is required to dig in metal pillars and strengthen foundations. Runs need to be done from bars of large section.
The essential detail here is the need to use different wood mixtures, you will need to use a mixture from rotting, perhaps varnishes or something similar..
In addition, you need to take into account the decorative potential of the wood fence, which can be equipped with various flower beds, which can be installed from the top or on the sides of the fence. In addition, one should make a blind area from below in order to drain moisture from the wood.
Metal fencing
They are also a common option and one of the most popular now is a combination of metal-profile construction and corrugated flooring.
The design is as follows:
- the basis is a metal profile with supports and a “pattern” of welded beams;
- the background is the corrugated board, which is mounted on one side of the metal profile.
As a rule, a pole of metal with a cross section of 60 to 60 is used as a support. Next, the widths (two, top and bottom) of approximately 40 millimeters in cross section are established.
On such a structure are installed (welded) metal elements that are mostly decorative, you can choose the design and method of welding of these elements..
The advantage of this design is the visual lightness and at the same time weighty strength. The metal creates a solid construction that looks very solid, but there is a lot of free space between the metal.
If you do not want outsiders to appear on your personal space, from the side of the site is attached polycarbonate, which is translucent.
It should be noted now available in a variety of colors of polycarbonate, which allows you to choose the best option based on your needs and preferences.
